Steel Grit

High Carbon Cast Steel Shot and Grit

Our steel shot and grit is produced by atomization of molten steel followed by a series of thermal and mechanical treatments in order to give the product the desired characteristics. Centrifugalizing process instead of high water jet streams to atomize the liquid steel into more spherical and uniform particles.

Chemical Composition:

C0.85-1.20

Mn0.40-1.20

Si0.40-1.20

S≤0.05

P≤0.05

Steel Shot Hardness (HRC) : 40-50

Steel Grit Hardness (HRC) : 60-66(GH) 50-60(GL) 42-50(GP)

Metallographic StructureEven tempered martensite

Three types of grits as below: 

Specifications :

Steel Grit

Three types of grits as below: 

•  GP grits with normal hardness ranging from 42-50 HRC. The edges diminish with time.  
•  GL grits with hardness ranging from 50-60 HRC. The edges diminish with time and become round after few operations.  
•  GH grits with hardness ranging from 60-66 HRC. Used for marble & granite cuttings and finishing. Being hardened, the edges remain sharp throughout the process and for a longer time.

Specifications :

High Carbon Cast Steel Shot and Grit

Our steel shot and grit is produced by atomization of molten steel followed by a series of thermal and mechanical treatments in order to give the product the desired characteristics. Centrifugalizing process instead of high water jet streams to atomize the liquid steel into more spherical and uniform particles.

Chemical Composition:

• C0.85-1.20
• Mn0.40-1.20
• Si0.40-1.20
• S 0.05
• P 0.05
• Steel Shot Hardness (HRC) : 40-50
• Steel Grit Hardness (HRC) : 60-66(GH) 50-60(GL) 42-50(GP)
• Metallographic StructureEven tempered martensite

Three types of grits as below: 

•  GP grits with normal hardness ranging from 42-50 HRC. The edges diminish with time.  
•  GL grits with hardness ranging from 50-60 HRC. The edges diminish with time and become round after few operations.  
•  GH grits with hardness ranging from 60-66 HRC. Used for marble & granite cuttings and finishing. Being hardened, the edges remain sharp throughout the process and for a longer time.

Specifications :

Steel Grit

Three types of grits as below: 

•  GP grits with normal hardness ranging from 42-50 HRC. The edges diminish with time.  
•  GL grits with hardness ranging from 50-60 HRC. The edges diminish with time and become round after few operations.  
•  GH grits with hardness ranging from 60-66 HRC. Used for marble & granite cuttings and finishing. Being hardened, the edges remain sharp throughout the process and for a longer time.

Specifications :